Installation Requirements

• Mount post width must be equal to or greater than 450 mm
• Panel width must be equal to or greater than 480 mm
• Rack mounting depth: 610 mm to 890 mm
• Rack mounting hole support:
  • Square hole: at least 9.5 mm x 9.5 mm
  • Round hole: at least 7.1 mm

Compatibility

• FS series: FS3400, FS3017, FS2017
• SA series: SA3400, SA3200D
• 22 series: RX1222sas
• 21 series: RS4021xs+, RS3621xs+, RS3621RPxs, RS2421RP+, RS2421+, RS1221RP+, RS1221+
• 20 series: RS820RP+
• 19 series: RS1619xs+, RS1219+, RS819, RXD1219sas
• 18 series: RS3618xs, RS2818RP+, RS2418RP+, RS2418+, RS818RP+, RS818+, RX418
• 17 series: RS18017xs+, RS4017xs+, RS3617xs+, RS3617RPxs, RS3617xs, RX2417sas, RX1217sas, RX1217RP
• 16 series: RS18016xs+, RS2416RP+, RS2416+, RS816
• 15 series: RS815RP+, RS815+, RS815, RX415
• 14 series: RS3614xs+, RS3614RPxs, RS3614xs, RS2414RP+, RS2414+, RS814RP+, RS814+, RS814, RX1214RP, RX1214
• 13 series: RS10613xs+, RS3413xs+, RX1213sas
• 12 series: RS3412RPxs, RS3412xs, RS2212RP+, RS2212+, RS812RP+, RS812+, RS812
• 11 series:RS3411RPxs, RS3411xs, RS2211RP+, RS2211+, RS411, RX1211RP, RX1211
• 10 series: RS810RP+, RS810+, RX410
• 9 series: RS409RP+, RS409+, RS409, RX4

Package Contents

• 2 x Mounting Rails
• 3 x 2U/3U Screws (M5*20L mm, PH2)
• 3 x 1U Screws (10#32*7L mm, PH2)
• 5 x Inner Rail Screws (M4*4L mm, PH2)
• 3 x Cage Nuts (M5)
• 1 x PH2 Screw Drive