Ubiquiti UniFi UAP-AC-HD Simultaneous MU-MIMO WiFi PoE Access Point

Please Note:This product comes with a PoE injector included, however, these do not include a UK cable. If you require one to go with your PoE injector

Ubiquiti (UAP-AC-HD) UniFi AP AC HD Indoor/ Outdoor Wave 2 Access Point

Ubiquiti (UAP-AC-HD) UniFi AP AC HD Indoor/ Outdoor Wave 2 Access Point features the latest in Wi-Fi 802.11AC Wave 2 MU-MIMO technology and a refined industrial design.

The UAP-AC-HD is perfect for use both indoors and outdoors and has simultaneous dual band.

Dual-band, 802.11ac Wave 2 access point designed to support high-density networks and critical system applications.

The Access Point AC HD (UAP AC HD) is a high-performance, indoor/outdoor, 802.11 ac WiFi access point that utilizes Wave 2 technology to reach an impressive 2+ Gbps aggregate throughput rate with its 5 GHz (4×4 MU-MIMO) and 2.4 GHz (4×24 MIMO) bands.

The UAP AC HD also has a focused antenna pattern to enhance your network’s capacity and reduce interference from neighboring access points.

This access point is powered with PoE+ and is equipped with (2) GbE RJ45 ports and (1) USB port to support multiple connection types.

The UAP AC HD can be set up in minutes and fully managed with the UniFi Network web application or UniFi mobile app.

Key Features

• Simultaneous Dual-Band
• Four-Stream 802.11AC Wave 2 Technology
• 4×4 Multi-User MIMOt
• 802.3at PoE+ Compatibility
• 500+ Client Connections
• 800 Mbps at 2.4GHz

Extend Your Coverage

With the UniFi Controller software running in a NOC or in the cloud, administrators can manage multiple sites: multiple, distributed deployments and multi-tenancy for managed service providers.

Real-World Performance

The UniFi AC HD AP is the first UniFi 802.11ac Wave 2 AP. Combining the performance increases from MU-MIMO technology and the use of 4×4 spatial streams, the UniFi AC HD AP delivers up to 125% greater performance than a typical Wave 1 AP Below are some deployment examples.

For optimal performance, use MU-MIMO clients. SU-MIMO clients will also benefit and gain up to 10-20% greater performance when used with the UniFi AC HD AP.

System Example

Specification

General

• Dimensions: 220 x 220 x 48.1 mm (8.66 x 8.66 x 1.89″)
• Weight: 700g (1.54 lb)
  • With mounting kits: 830g (1.83 lb)
• Networking Interface: (2) 10/100/1000 Ethernet Ports
• Buttons: Reset
• Power Method: Passive Power over Ethernet (48V), 802.3at PoE+ Supported
• Supported Voltage Range: 44 to 57VDC
• Power Supply: 48V, 0.5A PoE Gigabit Adapter
• Power save: Supported
• Maximum Power Consumption
• TX Power
  • 2.4 GHz: 6-25 dBm
  • 5GHz: 6-25dBm
• Antennas
  • 2.4 GHz: (2) Dual-Port, Dual-Polarity Antennas, 3 dBi each
  • 5GHz: (2) Dual-Port, Dual-Polarity Antennas, 4 dBi each
• WiFi Standards: 802.11 a/b/g/n/ac/ac-wave2
• BSSID: Up to Four per Radio
• Wireless SecurityL: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
• Mounting: Wall/Ceiling (Kits Included)
• Operating Temperature: -10 to 70° C (14 to 158° F)
• Operating Humidity: 5 to 95% Noncondensing
• Cerfiications: CE, FCC, IC

Advanced Traffic Management

• VLAN: 802.1Q
• Advanced QoS: Per-User Rate Limitingl
• Guest Traffic Isolation: Supported
• WMM: Voice, Video, Best Effort, and Background
• Concurrent Clients: 500+

Supported Data Rates (Mbps)

• Standard Data Rates
• 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
• 802.11n: 6.5 Mbps to 450 Mbps (MCS0 – MCS23, HT 20/40)
• 802.11ac: 6.5 Mbps to 1.7 Gbps (MCS0 – MCS9 NSS1/2/3/4, VHT 20/40/80)
• 802.11b: 1, 2, 5.5, 11 Mbps
• 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps